Your Cart

Acrygel ReformA is a hybrid of gel and acrylic - a new generation of materials for nail extension. This material has collected the best qualities of gels and acrylics for nails, providing nail masters and lovers of beautiful manicure with the best conditions for work. ReformA Polygel is supplied in plastic tubes. To work with this material, the craftsman also definitely needs a construction fluid or a means to remove the sticky layer and a UV lamp or LED lamp (at least 36 watts) to polymerize the acrygel.

Features of akygel ReformA:

  • Convenience of laying out the material: polygel is a very thick gel, which is as convenient to work with as with an acrylic “ball”.
  • The polymerization of polygel occurs only in a UV lamp, it does not dry in air like acrylic. This allows the master not to rush to lay out the material, because. it won't bleed into the cuticle like a gel.
  • When cured, Polygel does not bake in the lamp, making it ideal for building or strengthening thin, sensitive nails.
  • Polygel lends itself to sawdust much better than gel, while a lot of fine dust is not formed, which negatively affects the health of the respiratory tract of the master and client.
  • The cured polygel is as strong and resistant to any external influences as a gel.
  • Does not turn yellow, does not fade in the sun, which is especially important when building a jacket.
  • Polygel does not require the use of pungent monomers - the design fluid is odorless! Also, the base and top are not provided in the technology of working with polygels. This makes it possible to classify polygels as economical artificial materials.
  • Polygel is convenient to quickly strengthen natural nails, under gel polish, and for wearing without coating.
  • Polygel can be removed both by sawing and soaking, just like acrylic!

Characteristics:

Color white
Capacity 30 g
Manufacturer REFORMA

How to use acrylic gel ReformA:

  1. Sand the surface of the nail with a buff, give the necessary shape to the free edge.
  2. Degrease the nail plate, apply a primer.
  3. Squeeze out the required amount of polygel, apply on the nail plate, model the required shape and size, using a brush dipped in the liquid.
  4. If you decide to build nails, you should use special forms or tips for nails.
  5. Dry the material for 3 minutes in a UV lamp or 30 seconds in a LED lamp.
  6. If necessary, grind and give the necessary shape to the nails with a file or buff.
  7. The last step is to clean the surface with a degreaser. Your nail is ready for further procedures!

ReformA acrylic gel removal technology:

  1. Sand the surface of the nails with a coarse buff or file.
  2. Plentifully moisten a cotton pad with remover and place it on the nail. Fix the cotton pad tightly with foil. Repeat the procedure for each nail. Hold for 10-15 minutes.
  3. Remove the remaining acrygel with an orange stick or pusher.
  4. Level the surface of the natural nail with a grinder, then polish the nail to a shine using cuticle oil.

Recently viewed products